SEM 922 All Wheel Drive Motor Grader for Snow Removing
Product description
Model |
SEM915 |
SEM922AWD |
Standard Operating Weight |
12,200 kg |
16,560 kg |
Blade |
3,059*20*580 mm |
4279*25*610 mm |
Min. Turning Radius |
7.3 m |
7.8 m |
Wheelbase |
5830 mm |
6140 mm |
Travel Speed, Forward |
5.2/8.1/13/19.8/29/40 kph |
5.3/9.1/12/20/25/40 kph |
Travel Speed, Reverse |
5.2/13/29 kph |
5.3/12/25 kph |
Engine |
SDEC (ShangHai Diesel) |
SDEC (ShangHai Diesel) |
Rated Power |
110 kW |
162 kW |
SEM Tandem Axle
- Leveraging C.A.T designing and experience on MG tandem axle
- Improved bearing Layout and optimized load distribution with 4 planetary gears final drive
- Less down time and reduced labor and service cost for maintenance and repairing
- Longer service interval for lubrication oil change
- Leading in class manufacturing and quality control level, mandatory performance testing before delivering to MG assembly line
Control System
- 7 position link bar with electric over hydraulic control allows ease of operation from within the cab
- Optimum blade reach capability, quick DCM re-positioning for greater reach for better working on high bank side slope
- The link bar is essential for extending reach capability when cutting a bank slope or back slope of a ditch
- Replaceable bushings reduce service time and cost
Blade Float
- Standard blade float function allows blade to lower without hydraulic pressure for increased versatility
- Blade float is engaged by pushing the left and right lift cylinder controls all the way forward past the detent
- Provides protection for machine and pavement during snow removal and snow plowing
Hydraulic System
- Proportional Priority Pressure Compensating (PPPC) Valves contain specifically cut spools for motor grader applications, continuously matching of hydraulic flow and pressure to power demands, allowing ease of multi-function control for optimizing working efficiency
- World-class variable displacement piston pump, efficiently reduces power consumption and hydraulic system heat, improving fuel efficiency
- Load-sensing hydraulic system provides consistent and precise blade movement, improving finishing performance
- Inboard lock check valves within PPPC, prevents inadvertent cylinder movement and potential leaks
Drawbar
- A-frame tubular design drawbar provides maximum strength and durability
- Replaceable drawbar draft ball (bolted - not welded) for less service time and cost
- Easy removal of wear shims to adjust drawbar
Front Frame
- Flanged box section design removes welds from high stress areas, improving reliability and durability
- Continuous top and bottom plate construction provides consistency and strength, improving front frame durability
- Hydraulic hose routing minimizes exposure to damage and provides quick access forservice
- Maintenance-free bushings improve durability and reduce overall service cost
Control Layout
- Short throw levers are efficiently spaced, allowing ease of multi-function control
- Short lever travel (40mm) with low lever effort reduces operator fatigue
All Wheel Drive (922 AWD)
- All wheel drive (AWD) function designed for poor underfoot applications (snow, sand, gravel, mud, etc.)
- Infinitely variable speed pumps and two-speed motors maximize torque in each gear delivering the most power to the ground
- Exclusive steering compensation system enables a "powered turn" with improved control and a dramatic reduction of turning radius in poor underfoot conditions
Product Link™
- Product Link™ will support your business, and accurately convey information of the equipment to relevant personnel in a timely and effective manner for your better equipment management.
Company information