Foton Loxa 85X6 85 Ton 90 Ton Mobile Truck Crane
Product description
FTC85X6 adopts a 4-axle truck crane special chassis, H-shaped outrigger form; 6-section U-shaped main boom, single-cylinder pin telescopic system, two-section truss-type jib, optional extended section, gooseneck arm, combined balance weight, The new energy-saving hydraulic system fully applies crane intelligent boom technology, making the operation safer and more reliable. The product performance is industry-leading, and it is safer, more reliable and energy-saving.
| Model |
LOXA FTC25X5 |
LOXA FTC85X6 |
| Max. lifting capacity |
25 t |
85 t |
| Max. lifting height |
51.3 m |
80.5 m |
| Max. lifting moment |
1213 kN.m |
3528 kN.m |
| Boom length |
43 m (5 sections boom) |
63 m (6 sections boom) |
| Max. gradeability |
42% |
48% |
| Max. travel speed |
90 km/h |
80 km/h |
| Max. counterweight |
7 t |
27 t |
| Overall weight |
34150 kg |
50 t |
| Dimension |
13180*2575*3640 mm |
14850*2850*3900 mm |
| Engine power |
220/2100 kW/r/min |
276/1900 kW/r/min |
| Axle brand |
Hande |
Hande |
| Gearbox brand |
Fast |
Fast |
| Cab |
ETX |
ETX |
| Operation system |
Pilot control |
Electronic control |
Hydraulic crane is a kind of heavy-duty equipment used for lifting and hoisting. Unlike small gearboxes that rely on electric or diesel power, hydraulic gearboxes include an internal hydraulic system that allows cranes to lift larger loads. The hydraulic oil-filled hydraulic system allows the crane to transport heavy objects (such as containers and tractors), and these objects are far greater in size and range than any other lifting equipment.
Each hydraulic crane can set the closed operator's cab on the steel base. Some of these routes may be set on wheels or tracks, while others are fixed. From the cab, the operator controls a well-known boom. Many hydraulic channels have telescopic telescopic arms, allowing the operator to reach the goal to extend the length of the telescopic arm to reach greater distances. The cables, blocks and hooks tied to the boom can be fixed to different objects, so that the crane can safely lift or lift the equipment.
The crane's engine powers the hydraulic pump, which applies pressure to the oil or fluid in the hydraulic system. Since the oil cannot be compressed, the oil is forcibly transferred to other parts of the crane in this way. By redirecting the force needed to lift objects, hydraulic systems can help increase power and performance.
The rated lift of hydraulic cranes depends on their total lifting capacity, and hydraulic cylinders are both the structure of the hydraulic crane and the strength of the hydraulic system. Taking a 10-ton crane as an example, it can lift up to 10 tons (9,070 kg). Each hydraulic crane must be selected correctly according to the needs of a specific project, and if the load is too heavy, it will cause the crane to fail.
Different hydraulic crane designs make it easier for users to perform specific tasks. When many ships and warehouses rely on viaducts, those on tracks or wheels may be best suited for construction sites. Like our folding cranes, even smaller hydraulic cylinders can be found on the board or on the truck.
Due to the large size and high power of hydraulic cranes, all operators should receive strict safety training to reduce the risk of accidents. Cranes that suffer from operational failures may cause accidents caused by fires or falling objects in the vicinity of the operator. Well-trained operators may guide the crib to nearby buildings or even people. An improperly set gate may even indicate tipping over, causing major damage. Safety training is not required in all areas, so individuals or organizations should conduct regular training to minimize responsibilities and maximize safety.
Company information
Audited Supplier 
){kind=link}
){kind=link}