Concrete Pump Truck Used ZOOMLION 47X-5RZ Truck Pump 47m
Main Featuers:
Boom intelligent damping technology:The soft control of booms in starting, slewing and stopping reduces the impacting vibration of
booms and therefore makes the vehicle operate more stably, reliably and safely.
Accurate pumping control technology(APC):Great leap of pumping accuracy and adaptability, improving pump efficiency.
Adaptive concrete material pumping technology: Improve pumping control system for poor concrete with segregation and big
viscosity, and auto-adaptive pumping mode, reducing the block rate by more than 50%.
Dual-pump and dual-loop hydraulic system: Less hydraulic impact, High efficiency, Low failure rate.
Three-stage fault diagnosis: boot self-check, process self-chec and shutdown detection is adopted to realize the overall control
of the product's health condition.
Long life wearing parts: Reduce working cost remarkably. Continuously improve wearing part's life by using new material, new
process and new designing.
Specification
Item |
Unit |
Value |
Remarks |
Working performance |
Max. rated lifting capacity |
kg |
25000 |
|
Max. load moment of basic boom |
kN.m |
1029 |
|
Max. load moment of main boom(fully extended) |
kN.m |
564 |
|
Max. load moment of basic boom |
m |
10.7 |
|
Max. lifting height of main boom |
m |
35 |
These parameters do not include deflection of main boom and jib |
Max. lifting height of jib |
m |
40.5 |
Working speeds |
Max. hoist rope speed(Main winch) |
m/min |
120 |
At the 4th layer |
Max. hoist rope speed(Auxiliary winch) |
m/min |
100 |
At the 2nd layer |
Boom demrricking up time |
s |
40 |
|
Boom demrricking up time |
s |
80 |
|
Slewing speed |
r/min |
0 -2.2 |
|
Driving parameters |
Max. driving speed |
km/h |
80 |
|
Max. gradeability |
% |
40 |
|
Turning diameter |
m |
≤22 |
|
Min. ground clearance |
mm |
235 |
|
Oil consumption per hundred kilometers |
L |
35 |
|
Mass |
Deadweight in driving condition |
kg |
29600 |
|
Complete vehicle kerb mass |
kg |
29600 |
|
Front axle load |
kg |
6500 |
|
Rear axle load |
kg |
25900 |
|
Dimensions |
Overall dimensions(L×W×H) |
mm |
13000×2550×3500 |
|
Outrigger spread(L) |
m |
5.36 |
|
Outrigger spread(W) |
m |
Fully extended:6.1, Intermediately extended:4.2 |
|
Tail slewing radius |
mm |
3385 |
|
Main boom length |
m |
10.6 - 40.0 |
|
Boom angle |
° |
-2 - 80 |
|
jib length |
m |
8.0 |
|
Offset |
° |
5,17,30 |