| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Category | Item | Units | Parameters | |
| Outline Dimensions Parameters |
Overall length | mm | 14300 | |
| Overall width | mm | 2200 | ||
| Overall height | mm | 3250 | ||
| Axle base | mm | 6850 | ||
| Front tread | mm | 800 | ||
| Rear axle | mm | 1950 | ||
| Weight Parameters |
Dead weight in travel state | Kg | About 20000 | |
| Axle load | Front axle | Kg | 11000 | |
| Rear axle | Kg | 9000 | ||
| Travel parameters | Travel speed | Max. travel speed | Km/h | 15 |
| Turning radius | Min. Turning radius | m | 18 | |
| Min. ground clearance | mm | 300 | ||
| Outrigger span in working state | m | 4.2X4.2 | ||
| Turning radius at swing table tail | m | 2.7 | ||
| Performance parameter | Max. lifting height | m | 23 | |
| Max. lifting capacity | t | 2.9 | ||
| Max. working radius | m | 26 | ||
| Min. working radius | m | 6 | ||
| Lifting speed | m/min. | 13/26 | ||
| Lifting motor power | kw | 11/7 | ||
| Swing speed | rpm | 0.25/0.8 | ||
| Swing motor power | kw | 2.2 | ||
| Luffing speed | m/min. | 20/40 | ||
| Luffing motor power | kw | 2.4/1.5 | ||
| Erecting time | min. | 10 | ||
| Folding time | min. | 8 | ||
| Hydraulic system working pressure | MPa | 28 | ||
| Oil tank capacity | L | 240 | ||
| Hydraulic station electric power | KW | 7.5 | ||
1) The Lifting Load data given in the table are the maximum lifting capacity when the crane is set up on firm and level ground. The load is not exceeding the load of 75% of the tipping load.
2) The total rated lifting load indicated in the table includes the weight of hook block and slings.
3) The working radius given in the table are the actual values including the deflection of boom under load, so lifting operation should be carried as per the radius.
4) The 75% of the tipping load takes into account wind force 5, i.e. , lifting operation still can be carried on with full-extended outriggers when wind pressure exceeds 70N/m2
){kind=link}