2024 100% New 20tons Excavator Xe200da Cummings Engine 135kw 0.93m3 Hydraulic Excavator with Various Attachments

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: XE200DA
• Type: Crawler Excavator
• Usage: GM Excavator
• Bucket: Backhoe
• Transmission: Hydraulic Transmission
• Drive Type: Internal Combustion Drive
• Bucket Capacity: 0.93 Cbm
• Size: Medium-Sized
• Certification: CE, ISO9001: 2000
• Condition: New
• Power: 135 Kw
• Machine Weight: 21200kg
• Maximum Digging Height: 9680mm
• Maximum Digging Depth: 9680mm
• Max Digging Radius: 9920mm
• Gradeability: 70%
• Transport Length: 9625mm
• Transport Width: 2910mm
• Transport Height: 3100mm
• Rated Speed: 5.3/2.9 Km/H
• Fuel Tank: 400L
• Bucket Digging Force: 149kN
• Arm Digging Force: 121kN
• Displacement: 6.7L
• Transport Package: Suitable for Transport
• Specification: /
• Trademark: /
• Origin: China
• HS Code: 8429521200
• Production Capacity: 100 Units/Month

Product Description

Product Description

2024 100% New 20Tons Excavator XE200DA Cummings Engine 135kw 0.93m3 Hydraulic Excavator with Various Attachments

More energy-saving and environmentally friendly
 

Lower fuel consumption
The engine meets the National III emission standards, customized power and fuel consumption characteristic curves, and the commonly used speed is set in the low-speed and high-torque area, which has sufficient power and low fuel consumption.
 

Hydraulic system optimization
By minimizing the length of the pipeline, increasing the pipeline diameter, using elbows, reducing right-angle joints, using flange joints, and avoiding threaded joints, the circuit pressure loss is reduced by more than 5%.

More efficient returns
 

Faster operation efficiency
The main pump corresponds to the engine setting pressure-flow curve to achieve perfect power matching, fully absorb the engine's output power, fast operation speed, and efficiency improvement of more than 10%. The main controller is upgraded, the calculation speed is increased by more than 5%, the speed sensor control response time is shorter, and the operation is smoother and more efficient.

 

More reliable and durable
 

--The arm adopts three-section splicing of the side plate.
--The reliability is significantly improved by optimizing the structure of the shaft seat forging and eliminating weld defects.
--The wear resistance and reliability of the joint parts such as the double-side locking of the pin shaft are greatly improved by adopting the lubrication method of intermediate grease, using T-type sleeve bearings and oil hole bearings, and the wear resistance and reliability of the joint parts such as the double-side locking of the pin shaft are greatly improved.
--The chassis is lengthened and widened, with good stability. Through the integral forging of the slewing bearing mounting seat and the increase in the thickness of the vertical plate of the through-type guide wheel reinforcement rib X frame, the lower frame has high strength, good rigidity, and is reliable and durable.
--The structure of the working device is optimized, and the boom is greatly improved by adding a dovetail reinforcement plate at the root and increasing the thickness of the front fork plate.
--Multi-level protection of the fuel system The three-level filtration of the fuel system, the quick release device of water in the diesel tank, the increase in the height of the oil suction port in the diesel tank, and the addition of a fuel breathing valve on the diesel tank greatly reduce the possibility of water and impurities invading the engine.
--Cummins six-cylinder engine, with sufficient torque reserve, small relative load, reliable and durable.
--The slewing bearing is from Ro the Erde, the world's leading brand of slewing bearings, with a large bearing diameter and high hardness.

 

 

Product Parameters

Model		Unit	XE200DA
Operation weight		Kg	21200
Bucket capacity		m³	0.93
Engine	Engine model	/	CUM-MINS QSB7
	Electric injection	/	√
	44-stroke	/	√
	Water cooling	/	√
	Turbocharged	/	√
	Air-to-air cooling	/	√
	Number of cylinders	/	6
	Engine output	kw/rpm	135/2050
	/ Maximum torque/speed	N.m/ rpm	740/900-1600
	Displacement	L	6.7
Main performance	Travel speed	km/h	5.3/2.9
	Slewing speed	r/min	11.6
	Gradability	°	≤35
	Ground pressure	kPa	46.9
	Bucket digging force	kN	149
	Arm digging force	kN	121
	Maximum traction	kN	184
Hydraulic system	Main pump	/	2
	Main pump rated flow	L/min	2×218
	Main safety valve pressure	MPa	34.3
	Travel system pressure	MPa	37
	Swing system pressure	MPa	28
	Pilot system pressure	MPa	3.9
Oil capacity	Fuel tank capacity	L	400
	Hydraulic oil tank capacity	L	220
	Engine oil capacity	L	24
Overall dimensions	A Total length	mm	9625
	B Total width	mm	2910
	C Total height	mm	3100
	D Turntable width	mm	2830
	E Track length	mm	4155
	F Chassis total width	mm	2890
	G Track width	mm	600
	H Track wheelbase	mm	3366
	I Track gauge	mm	2290
	J Counterweight ground clearance	mm	1050
	K Minimum ground clearance	mm	486
	L Tail minimum turning radius	mm	2890
	M Track height	mm	900
	a Maximum digging height	mm	9680
	b Maximum dumping height	mm	6815
	c Maximum digging depth	mm	6460
	d 8 Digging depth at 8 feet horizontal	mm	6480
	e Maximum vertical digging depth	mm	5700
	f Maximum digging radius	mm	9920
	g Minimum swing radius	mm	3530
	Boom length	mm	5680
	Arm length	mm	2910
	Bucket capacity	m³	1.0

 

Detailed Photos

 

Company Profile

The smallest in our fleet and a champion of confined spaces, the SY16C provides excellent value for general construction builders, landscaping, and utility contractors. With reduced tail swing, retractable undercarriage and dozer blade extensions, this machine is ideal for moving through narrow doorways, fences, and other passageways. The primary auxiliary circuit allows you to use a multitude of powered attachments to suit the application. The open canopy on the SY16C makes it a more cost-effective choice for your first machine or an addition to your existing fleet and allows the operator 360° visibility along with efficient ingress/egress. Backed by the industry's strongest standard warranty of 5 years/5,000 hours, the SY16C delivers maximum value.

 

* Retractable undercarriage
* Swing boom functionality
* Reduced tail swing
* Primary auxiliary circuit to run powered attachments
* 9″ rubber tracks for surface preservation
* Powerful Yanmar engine