Oriemac: 100ton China 5 Telescopic Boom Xct100 with Spare Parts Truck Crane

• After-sales Service: Free Spare Parts, Online Maintenance
• Warranty: 1 Year
• Certification: ISO9001
• Condition: New
• Maximum Lifting Height: 98m
• Maximum Lifting Weight: 100ton
• Model NO.: XCT100
• Shaft Number: 5
• Crane Jib: Six-Arm
• Type: Straight Arm
• Min. Rated Working Radius: 3m
• Fully-Extended Boom + Jib: 99.5m
• Boom Fully Extended Time: Less Than 650s
• Max. Slewing Speed: More Than 1.5r/Min
• Rated Power: 356/1900kw/(R/Min)
• Max. Output Torque: 2300/1050-1400n.M/(R/Min)
• Max. Travel Speed: More Than 90km/H
• Fuel Consumption Per 100 Km: 65L
• Engine Model: Sinotruk Mc13.48-50
• Transport Package: Nude
• Specification: 15810x3000x3990mm
• Trademark: Oriemac
• Origin: China
• HS Code: 8705109200
• Production Capacity: 1000 Sets/Month

Product Description

XCT100 TRUCK CRANE

 

Hydraulic system

Electric proportional variable pump is used for lifting, elevating and telescoping operations. A closed pump is used to drive slewing operation. The proportional solenoid steering control valve; air-cooled hydraulic oil radiator. Effective volume of hydraulic oil tank: 818L

Control system

The electric-proportional pilot operation system is equipped with two levers at left and right sides controlling the main movements of the crane, and stepless slewing speed regulation is available.

Main winch

Hydraulic control is used for speed regulation. The system is driven by a hydraulic motor through a planetary gear reducer,

with a normally closed brake, a balanced valve and a grooved drum equipped.

Auxiliary winch

Hydraulic control is used for speed regulation. The system is driven by a hydraulic motor through a planetary gear reducer, with a normally closed brake, a balanced valve and a grooved drum equipped.

Slewing system

A single-row, four-point contact-ball external slewing bearing; the system is driven by a hydraulic motor through a planetary gear reducer with constantclosed brake equipped, and may continuously slew 360°.Power control and free slewing function as well as stepless speed regulation are available.

Luffing system

Single elevating cylinder and the elevating counterbalance valve with the load compensation function. Balance valve-controlled boom gravity combined with power for lowering boom is used for boom elevating down.

Operator's cab

Steel cab with a full-view windshield, safety glass, sliding door, adjustable seat with electric heating function; it can tilt backward about 20°; double-layer sun shield is adopted for roof window; sun shield is also equipped at the windshield

and rear window; wipers, roof guardrails, pull-out step, LMI, human-machine interactive control panel, electric controlled

armrest, engine accelerator pedal, engine start switch, etc. are also available. Heater, air conditioner and fire extinguisher of 2 kg are standard.

Safety devices

Hydraulic counterbalance valve; hydraulic relief valve; hydraulic double-way valve; LMI; lowering limiter; anti-two block; anemometer; winch monitor

Combined counterweight

Total weight is 45t. 5 counterweight combinations of 1.8t, 15.8t, 22.5t, 30t and 45t are available.

Description		Unit	Parameter value
Overall length		mm	15810
Overall width		mm	3000
Overall Height		mm	3990
Wheel Base		mm	2200+3050+1500+1500
Track(front/rear)		mm	2528/2528/2518/2518/2518
Front/Rear overhang		mm	2695/2760
Front/Rear extension		mm	1735/365
Total vehicle mass in travel configuration		kg	54990
Axle load	1st and 2nd Axle	kg	10395
	3rd,4th and 5th Axle		11400
Engine model			MC13.48-50(China V)
Engine rated power		kw/(r/min)	356/1900
Engine rated torque		N.m/(r/min)	2300/1050-1400
Max. travel speed		km/h	≥90
Min. turning diameter		m	≤24.7
Min. ground clearance		mm	380
Max. grade ability		%	≥45
Approach angle		°	20
Departure angle		°	14
Braking distance (at 30 km/h, full load )		m	≤10
Oil consumption per 100km		L	65
Noise level at seated position		dB(A)	≤88
Exterior noise level		dB(A)	≤90
Max. total rated lifting capacity		t	100
Min. rated working radius		m	3
Turning radius at turntable tail	Counterweight	mm	5120
	Auxiliary winch	mm	4965
Max. load moment	Base boom	kN.m	4939
	Fully-extended boom		2713
	Fully-extended boom + Jib		1176
Outrigger span	Longitudinal	m	8.45
	Lateral	m	7.9
Hoist height	Base boom	m	14
	Fully-extended boom	m	65
	Fully-extended boom + Jib	m	98
Boom length	Base boom	m	13.6
	Fully-extended boom	m	65
	Fully-extended boom + Jib	m	99.5
Jib offset angle		°	0,15,30
Boom raising time		s	≤60
Boom fully extended time		s	≤650
Max. slewing speed		r/min	≥1.5
extending and retracting time	Outrigger beam	Retracting         s	≤40
		Extending         s	≤40
	Outrigger jack	Retracting        s	≤50
		Extending        s	≤50
Hoisting speed (single line, 4th layer, no load)	Main winch	m/min	≥135
	Auxiliary winch	m/min	≥90
Exterior noise level		dB(A)	≤124
Noise level at seated position		dB(A)	≤90