| After-sales Service: | Provide |
|---|---|
| Warranty: | Provide |
| Type: | Special Type |
| Transmission: | Hydraulic Transmission |
| Walking Mode: | Crawler |
| Load and Unload Method: | Front Discharge |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier ♦ WD10G178E25 engine gives you more power and reliability you need. Improved fuel economy over the previous model with strong torque output and low fuel consumption gives you excellent overall fluid efficiency.
♦ The gearbox uses a planetary gear structure that operates the hydraulic control valve to achieve forward, reverse and various shifts. The structure is planetary gear, multi-plate clutch, hydraulic combined with forced lubrication, which is divided into three forward and three reverse.
♦ The closed system keeps the tank pressure at a specific value, which can increase the evaporation temperature and heat dissipation efficiency of the cooling water. The fan power comes from the engine, and the forced air supply increases the cooling effect.
♦ Mainstream 14MPa working hydraulic system,can greatly reduce the failure rate of hydraulic components with overload protection function.
| Main Parameters: | |
| Operating weight | 24540 kg |
| Engine power | 179 kW (240 hp) @ 2000 rpm |
| Max travel speed, fwd | 12 km/h |
| Max travel speed, rev | 14 km/h |
| No. of speeds, fwd | 3 |
| No. of speeds, rev | 3 |
| Referenced Shoe width | 560 mm |
| Ground pressure | 76 kPa |
| Blade type | Straight |
| Blade capacity | 8 m³ |
| Depth below ground | 540 mm |
| Lift above ground | 1210 mm |
| Blade angle | 8 ° |
| Blade tilt | 735 mm |
| Transport length | 5500 mm |
| Transport width | 3725 mm |
| Transport height | 3438 mm |
| Model | US Imported |
| Emission | Stage I / Stage III |
| Ripper options | Single-shank; triple-shank |
| Blade options | Straight; Angle; Semi-U; Full-U; Landfill U-Blade; Coal blade |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}