| Customization: | Available |
|---|---|
| Type: | Vibratory Pile Hammer |
| Pressure Pile Driver Type: | Hydraulic Pile Driver |
|
Still deciding? Get samples of US$ 165000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It introduces the back-inclination large triangle structure with stationary luffing support, which is suitable for working conditions of low-tonnage drilling rig, improving the rigidity of working mechanism and enhancing the stability of whole drilling rig while achieving easy transportation;
The imported Kawasaki hydraulic parts can achieve reasonable powertrain matching and high construction efficiency;
The imported Cummins engine can minimize fuel consumption with the help of two optional accelerator control modes;
The working amplitude of auxiliary winch is increased, which can hoist light and small objects and save cost as well;
The main winch is designed with a high displacement motor, achieving more sensitive response and more reliable working and also getting rid of the difficulty in earth dumping for pile holes of small diameter;
The standard reducer joint can adjust drill rod combination according to actual conditions, thus effectively reducing fuel consumption and improving construction efficiency;
It introduces the proprietary intelligent control system, CAN bus and PLC, including automatic/manual adjustment of drilling mast verticality, depth automatic detection and display, intelligent fault diagnosis and control.
| Description | Unit | Parameter value | |
| Max. drilling diameter | mm | Æ2000 | |
| Max. drilling depth | m | 67,standard configuration | |
| (5-section friction Kelly bar) | |||
| 52,optional configuration | |||
| (4-section-locking Kelly bar) | |||
| Allowable luffing scope (from center of drill rod to slewing center) | mm | 3905~4800 | |
| Drilling rig dimension in working condition (L × W × H) | mm | 8968×4400×22180 | |
| Drilling rig dimension in transport condition (L × W × H) | mm | 16360×3250×3535 | |
| Weight of overall unit (standard configuration, excluding drilling tool) | t | 76 | |
| Engine | Model | CUMMINS QSL-325 | |
| Rated power/speed | kW | 242/(2200r/min) | |
| Max. working pressure of hydraulic system | MPa | 35 | |
| Rotary drive | Max. torque | kN •m | 220 |
| Rotational speed(Standard configuration) | r/min | 7~25 | |
| Crowd cylinder | Max. Pushing force | kN | 200 |
| Max. Pulling force | kN | 200 | |
| Max. stroke | mm | 5000 | |
| Main winch | Max. pulling force | kN | 230 |
| Max. single-rope speed | m/min | 70 | |
| Diameter of the steel wire rope | mm | 30 | |
| Auxiliary winch | Max. pulling force | kN | 80 |
| Max. single-rope speed | m/min | 60 | |
| Diameter of the steel wire rope | mm | 20 | |
| Drilling mast | Left/right inclination of mast | ° | 4/4 |
| Front/back inclination of mast | ° | 5/15 | |
| Rotary table slewing angle | ° | 360 | |
| Traveling | Max. traveling speed of the overall unit | km/h | 1.5 |
| Max. climbable gradient of the overall unit | % | 35 | |
| Crawler | Width of crawler plate | mm | 800 |
| External width of crawler (min.-max.) | mm | 3250~4400 | |
| Center distance between two longitudinal wheels of crawler | mm | 4750 | |
| Average ground pressure | kPa | 108 | |
){kind=link}