| After-sales Service: | Free Spare Parts, Online Maintenance |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO |
| Condition: | New |
| Rated Load: | 3.5ton |
| Transmission: | Hydraulic |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 3.5ton electric wheel loader XC938
Travelling motor Adopting single-motor travel drive technology, the whole travel system adopts one motor, which is connected to the drive axle through the transmission shaft, optimizing the power matching, so that the whole machine has greater torque output and faster response speed. The motor adjusts the rotational speed in real time according to the throttle opening, realizing the stepless speed change of the whole machine.
Drive Axle Reinforced drive axle is adopted, with optimized design of the axle shell, enlarged cross-section of the shell, and 10% increase in load-bearing capacity and bending resistance. The strong construction machinery drive shaft has strong impact resistance and high reliability of power transmission. Key structural parts are subjected to finite element analysis to reduce stress concentration and eliminate local weaknesses to ensure that they meet all kinds of harsh working conditions. The front and rear frames are of heavy-duty and super-strong design, with thick steel plates, high strength and strong load-bearing capacity. Reasonable arrangement, simple structure, reduced compression and irregular welding seams, strengthened important bearing parts, can withstand torsion and impact loads under various working conditions. Increasing the distance between the upper and lower articulated pins in the articulated centre disperses the force at the articulated place, which reduces the stress on the articulated pins and improves the service life of the bearings. The working device is optimally designed, adopting the Z-type reversing six-link structure with single rocker arm, short drawbar and horizontal moving arm cylinder, which has small unloading impact and superior work performance and work efficiency. The main hinge point adopts two-stage dust proof structure, which can effectively prevent dust and protect the lubricating grease from contamination, and provide reliable protection for the hinge pin and axle sleeve. The main wearable parts of the bucket are made of wear-resistant plates, so the bucket has a long service life. New micro-boosted cab has large space, wide vision and good sealing. Adopting high-performance shock absorber connected with the frame, which greatly reduces the vibration of the cab. Mechanical damping composite control seat, comfortable operation. Intelligent temperature-controlled high-power cooling and heating air conditioning, suitable operating temperature.
|
Rated bucket capacity
|
2.1m3
|
|
Rated load
|
3500kg
|
|
Rated power(travel motor)
|
120kw
|
|
Rated power(hydraulic motor)
|
36kw
|
|
Total capacity
|
181km.h
|
|
Voltage level
|
521V
|
|
Battery Pack Brand
|
CATL
|
|
General condition
|
4-5h
|
|
Heavy-duty condition
|
3-4h
|
|
Operating weight
|
11850
|
|
Tipping load(full-steering)
|
7500kg
|
|
Dumping height
|
3120mm
|
|
Dumping range
|
1070mm
|
|
Wheelbase
|
2900mm
|
|
Wheel track
|
1850mm
|
|
Max tractive force
|
100kN
|
|
Max breakout force
|
110kN
|
|
Turning radius(tire center)
|
5100mm
|
|
Passing radius(outside the bucket)
|
6055mm
|
|
Boom lifting time
|
5s
|
|
Total cycle time
|
9s
|
|
Max gradeability
|
28°
|
|
Steering angle
|
39°
|
|
Min ground clearance
|
365mm
|
|
Travel speed(forward/reverse gear(1/2))
|
17/35km/h
|
|
Bucket width
|
2482mm
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}